Backup and Restore Exchange on VMware using NetBackup with GRT – Part1

Backup and Restore Exchange on VMware using NetBackup – Part1

In this blogging series we will explore how we can protect MS applications installed on VMware using NetBackup, this part will be the first and will explore how to configure NetBackup to protect Exchange 2013 installed on VMware ESXi 5.5

Although it might look straight forward, it is not that straight forward, you must understand some requirements and prerequisites in order to protect MS applications installed inside VMware VMs using Symantec NetBackup.

This lab will assume that you have:

  • 1 Domain Controller installed.
  • 1 Server running ESXi 5.5
  • 1 Server running Exchange 2013 installed on a VM on the ESXi host.
  • 1 Server running NetBackup Software for Windows (the configuration should be different on Linux installation).

 

So let us get started:

Introduction:

Symantec Netbackup 7.6.x can protect VMs and perform VM level backup using offloaded backups to VMware backup host, this backup method can accelerate backup and offload the backup load from the server.

Backups that are performed at the VM level are quiesced for VM consistent backup using VSS, additionally you can perform backup while the machine is running using VMware Snapshot technology.

Often times, MS gurus mix with using snapshots for VM protection and using Snapshots to perform backups, I believe that no one can explain it better than AbdulRasheed , he wrote a great article about it here http://www.symantec.com/connect/blogs/nuts-and-bolts-netbackup-vmware-virtual-machine-snapshots-backing-business-critical-applicatio

 So in summary, using snapshots for backups is not the same as using Snapshots to protect Exchange VM.

Now, although we can perform VM level backup at the host level without an agent installed on the ESXi or the VM by connecting vCenter directly, this backup method doesn’t support file level recovery for applications or GRT (you can perform regular file restore but not mailbox or database restore for SQL for example), so you will need to install Symantec NetBackup client on the Exchange or SQL VM in order to perform application aware backup.

Note: up to the date of publishing this article 13/4/2015, Symantec doesn’t support GRT for Exchange 2013, but GRT is supported for earlier versions either using VM policies or Exchange policies.

A word about SAN transport:

One element is to be aware of is the SAN transport option, traditionally if you backup a VM using the backup agent, you will transport the data over the IP network, but what if you have large data set…very large ones.

Then you can use the FC or SAN transport, where you can back up the data directly to the SAN over the SAN network (either to SAN storage or Tape Library).

In VMware, you can perform VM agentless or agent assisted backups and transport the data over FC which can give you increased speed up to 4 times, all what you need is to present the LUNs to the VMware backup host as offline LUNs and configure the policy to use SAN transport, nice haaa

Prerequisites:

  • Install the NetBackup Agent inside the VM
  • Install Symantec VSS provider
  • Install and configure NFS to browse backup images for GRT (for Exchange 2007/2010).

You can Refer to the documentation on how to perform the above steps.

NetBackup Configuration:

Assuming that you have everything configured including installing the Netbackup agent on the Exchange VM, you can start connecting to the vCenter:

08-04-2015 08-03-07
Add VMware Virtual Machine Server

 

Enter the FQDN of the vCenter server

 

Add the vCenter information and account with credentials to connect, and specify the backup host, in my case it is the master server:

08-04-2015 08-03-35

08-04-2015 08-04-05

one note: make sure to add the account using domain\username, because the GUI doesn’t accept user@domain.com

 

Now you can proceed with configuring a policy, so you can launch the policy configuration wizard:

08-04-2015 08-06-06

Specify a policy name

08-04-2015 08-06-18

In the Policy Storage select your storage destination, unless you have many of them and you want to load balance the backup jobs:

08-04-2015 08-06-38

In the virtual machine options, make sure to specify the VMware backup host, and enable the Exchange recovery.

08-04-2015 08-07-40

Note: in the primary VM identifier, you can select the VM host name, this requires the VM tools to be installed and DNS lookups (forward and reverse) are working, for the simplicity I like to choose VM Display name.

08-04-2015 08-18-38

In order to select a VM for application protection you must use query based to select the VM or you will get the error “Application Protection options for VMware policies are only valid when using the query option for virtual machine selection in the clients tab”, so you need to create a query in the VM selection to include the required VM

08-04-2015 09-25-31

In the backup selection, you must select full backups, you have to note that you can’t perform application level backups using incremental backups, backups of applications at the VM level must utilize full backups.

08-04-2015 09-24-46

Then specify the desired internal and retention and schedule.

08-04-2015 09-25-01

 

08-04-2015 09-25-13

If everything is configured correctly, you should start seeing the policy kicking in and snapshot is being taken and backups are being performed

08-04-2015 09-31-36

08-04-2015 09-32-33

08-04-2015 09-43-07

08-04-2015 09-43-35

Note regarding policy schedule:
if you right click on the policy and chose to run manual backup, the policy will kick in but the backup job will be equivalent to copy backups, meaning that no Exchange logs will be flushed, in order to perform application level backup, you will have to wait for the policy to kick in.

Policy Schedule and Policy Window

Another point that many NBU admins struggle with is the policy frequency, Window and retention, so let me elaborate on this:

Policy Frequency: is how often the policy will kick in, so in the above screenshot, the policy will start every week and this is equivalent to weekly backups.

Policy Window: is the window allowed for the policy to start, so depending on the configured policies, running policies and queued policies, a policy will start when the window comes, or wait until additional resources are freed if all the resources are not available (like a free tape for example).

If the window ended without available resources, the policy will not start and you will miss the backup window, once the policy start, it can exceed the policy window safely, policy window affects the policy start and will not end the policy.

In part 2 of this series we will see how we can perform a restore from the taken backup.

 

Install and Configure the Netbackup Appliance 5220

As promised, we will start today the journey of installing and configuring Netbackup Appliances, from my point of view it will be very cool blogging series, and the first of its type, in this blog series we will do the following:

  • Install and Configure Netbackup 5220 Master Appliance.
  • Install and Configure Netbackup 5220 DR appliance.
  • Install and Configure Netbackup 5020 Master Appliance.
  • Install and Configure Netbackup 5020 DR appliance.
  • Backup and Restore VMware Data and hopefully….Exchange 2010 Open-mouthed smile

So, without any further ado, let us rock and roll…

Install and Configure Netbackup 5220 Appliance:

the install and configuration of the Netbackup appliance is fairly easy, I have to admit that I am so surprised about that, the device boots with the default IP 192.168.1.1, and then you can use the web interface to configure it by browsing to http://192.168.1.1

image

Once logged in, you can use the setup appliance to setup your appliance:

image

The first page prompt you for the network configuration, select the interface, Netbackup appliance support wide rage of bonding option (or eth channel if you like this name), set your IP configuration (make sure that you have a route defined) and click next:

image

In the following page, enter the DNS server and SMTP server (to receive email notification):

image

Make sure that DNS setup is done:

image

In the NNTP, setup the NTTP server:

image

Make sure that it is completed successfully:

image

In the security, you get the chance to change your password, if you don’t want to click next:

image

In the role selection page, you get the chance to select the appliance role (either master or media) and the media appliance can be connected to a master server or a master appliance, since this is the first device, let us configure it as a master:

image

Now the appliance will be online once the setup is done, it takes around 10 minutes to complete:

image

image

image

Once rebooted click the reconnect, now you have your Netbackup appliance up and running:

image

Now, if you open the normal Netbackup Console, you can type in the device name and login to the netbackup software:

image

Voila………..

image

now your device is up and running in master mode, you can start playing and creating backup policies and backup jobs, in the next blog post we will see how we can add the other devices and use their storage, and again do some Exchange backup…again.